Notice: Before purchasing this item, please read the Disclaimer notice at the bottom of this product page.
HRS – 2017-19 Honda Civic Hatchback FK7 FK8 Type-R Carbon Fiber Spoiler
- 1 Set Spoiler
- Comes with all necessary hardware
Installation Instructions Not Included, installs using double side adhesive tape pads.
Please Note: This is an aftermarket part and may need some adjustments to fit properly.
Carbon Fiber Product Notice: Our carbon fiber parts might have slight imperfections due to the layering process of the raw carbon. Such imperfections unless extreme are not considered defects and will not be covered under the product warranty or product exchange policy. Light scratches or imperfections in the clear coat are inevitable during the manufacturing and shipping process and unless extreme are not covered under the product warranty or product exchange policy. Customer must examine the product after receiving it for any major defects or damages before installing it on their vehicle.
User installs at own discretion. Before purchasing our product, we recommend reading OUR POLICY.
Vehicles depicted are highly modified for show, which may include molding or adding to the original piece. To see what the part will look like and what is included, please reference the product images. This is an aftermarket part, professional installation is highly recommended. It may need slight modification to fit properly. Some issues are inevitable such as blemishes, chips, dents and scratches which usually occurs in transit and not covered under warranty. Customer must examine the product after receiving it for any major damages before the installation.
AFTER INSTALLATION, THE SPOILER NEEDS TO BE POLISHED AND CERAMIC COATED TO AVOID FADING. FADING IS NOT COVERED UNDER WARRANTY.
Recently viewed products
I would give this a solid 3 because of the cons list
This wing is LIGHT. A great weight reduction and looks really good. I didn’t have any resin cracking or anything, even in the tight gaps and corners.
Comes with no hardware essentially. I had to source my own hardware to fully put it together. Some of the bolts you have to screw in, you have to go from inside the base and the angle and location of the bolt,, there is NO tool made that I could think of to get in such a tight space to properly tighten it. You have to screw it in at an angle and try not to strip the screw. Or you will
Have to source a bolt to replace it and hope a ratchet and socket would fit(a stubby screwdriver barely halfway fits)
The way this attaches is literally by double sided adhesive. I’m not sure if they have actually even tested it driving down the road but there is no way I would trust that moving at highway speeds and the amount of pressure the wing creates for that adhesive to hold for more than a couple of minutes before flying off your car.
I ended up drilling 4 holes in my hatch (which will always be covered up no matter which wing or spoiler you go with) to mount it securely.
It looks great and I got a lot of compliments but I ended up taking it off and going a different route. Would highly advise the manufacturer to redesign the assembly points of this spoiler and how it mounts to the car by using factory bolt locations. I think it would sell better.
This company sent me 2 left bases for the type R wing, I waited 5 mo. for the actually painting to match the car color and the installer told me HRS sent me 2 left bases. I contacted them and they said they cannot send right part because its been to long and that I should have inspected the parts, as a costumer I cannot tell the difference when looking at the bases. Now I am out of 650 dollars and the extra money it cost to paint it which was like 500 dollars. HRS basically told me I was out of luck and nothing they could do, but seriously?! your manufacture sent me a product I cannot install. Never buying from this place again.