The passenger fog light is mounted directly in front of the washer fluid tank and it makes 1 screw literally a nightmare to get all the way in, I settled with half in. (Probably could be resolved with removing the front bumper) The fog lights are weak, they light up a dark area but not by much. They do match the stock headlights though in general appearance. The DRL is bright (very bright!) when hooked up to the red for power. If you hook up the green wire for power, then it is a dimmer brightness (I assume that wire is for the dimmer, which can be found on the back of the radio). Definitely use a plastic tool to take the stock covers out. The blinker has a cheddar cheese yellow appearance. I have a white LED in the stock blinker slot and I'm going to disconnect the stock blinker wire and just use this DRL as my blinker. The wire bundles, a hot mess and they dont reach to the pits of the bumper. I have ordered a bunch of wire and heat shrink and am just going to rerun all the wires from the controller and relay (keeping them in the cabin and just having the wires run out to the engine bay). There is a good firewall hole at the very top of the driver side that comes out right behind the battery. Switch fit well but its not lit except for a green light when its on (the icon isnt a blue light like the others), but it looks good enough at night as its the middle of the other 4 stock buttons. Long "review", figured I'd share some of my finds here.
