Check These Out!
Please Note: The chrome delete kit has a protective film installed on it. Due to the protective film, the kit looks scratched up and used. After installation, you must remove the protective film to expose the gloss back finish underneath.
HRS 2018-23 Toyota Camry Black Chrome Moldings Chrome Delete
Simply remove the 3M double sided tape and install on top of your existing chrome. Give your car a stylish look
Material: Plastic
Color: Gloss Black (you must remove the protective film from each piece to expose the gloss black underneath).
BOXED CONTENT:
- 10 Piece molding trims
Intermediate experience required to install these. May require shaving around the edges for perfect fitting.
We recommend watching the installation video below before installing this kit. It is also strongly recommended that you test fit all pieces of the kit before removing the backer from the adhesive tape.
Tip: Please make sure your properly clean the vehicle chrome using soap and water, then apply rubbing alcohol to the chrome surface to properly and completely remove anything that might keep the adhesive from sticking. We highly recommend using an adhesion promoter on the OEM chrome surface and a heat gun to heat the adhesive so that it sticks to the chrome surface more securely. You can also use an adhesive glue on the back of the pieces to help them stick better. The adhesive tape may take up to 24-48 hours to fully cure and be secure.
For the rear curved pieces you may need to apply additional thicker adhesive tape or use 3M adhesive glue to help them stay attached more securely.
Please Note: Improper installation is not covered under any warranty and will be considered as user error.
Product may fade or discolor with time due to exposure to extreme temperatures or harsh cleaning chemicals. These issues will not be covered under the warranty.
Limited 6 month warranty.
Installation Video:
DISCLAIMERS
User installs at own discretion. Before purchasing our product, we recommend reading OUR POLICY.